How to Program Chevy Key Fob

Congratulations! You just purchased a new Chevy in Blair. At some point, you may need to know how to program a Chevy key fob, either because you need a second one or you’re changing out the batteries on your current one.

If you’re unsure how to program a Chevy key fob, you’re not alone! Many Omaha and Lincoln drivers ask us about their Chevy key fob, especially if they’re used to using a physical key from their older vehicle they just traded in. The service team here at Sid Dillon Chevrolet-blair Inc is here to help! Discover our step-by-step instructions for Chevy key fob programming with our guide.

Chevy Key Fob Programming: A Step-by-Step Guide

With the Chevy remote start key fob you would like to use in hand, follow these simple steps to program it properly.

1. Manually unlock your car door with your Chevy key.
2. Ensure all car doors are fully shut, then insert the key into the ignition, but don’t start the car, truck, or SUV.
3. Press and hold the unlock button on the driver’s side door, then turn your key to the “On” position. The interior lights and radio will come on, but the engine should not have started at this point.
4. Turn the key back to the “Off” position, then turn it to “On” and right back to “Off” once again in quick succession. (On – Off – On – Off)
5. Release the unlock button.
6. After releasing the unlock button, the door locks should engage and disengage, telling you that the programming sequence can begin.
7. On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, indicating that you have successfully programmed your key fob.
8. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.

Whether you have a Chevy Malibu key fob or a Chevy Silverado key fob, these simple steps program the key fob for either of these models. And if you have any questions along the way, please don’t hesitate to give our service team a call at (402) 921-1125!

Where Can I Get a Chevy Key Fob Replacement?

If you lose your Chevy remote start key fob, Sid Dillon Chevrolet-blair Inc can help. The best place to get a Chevy key fob replacement is at a certified Chevrolet dealership in Blair, where you can be sure you’re getting a genuine Chevy key fob that will work with your vehicle just as seamlessly as the old one did. Don’t accept any substitutes or aftermarket key fobs! Those are not manufactured or tailored to your exact make and model.

Need a new Chevy key fob battery? We can help with that, too! Reach out to our parts department, and we’ll get you the battery you need as soon as possible. Our Chevy parts specialists will ensure you get everything you need to get back on the road in no time in Lincoln.

Get Additional Chevy Key Fob Programming Help at Sid Dillon Chevrolet-blair Inc

Whether you need help getting acquainted with your Chevy key fob, or you need a reliable source for Chevy key fob replacement, count on us. Don’t hesitate to contact us, call (402) 921-1125, or visit us near Fremont. We’re happy to help in any way we can!